Dr. M. Abdul Mujeebu

Dr. M. Abdul Mujeebu Dr. M. Abdul Mujeebu
B. Tech (Kerala University)
M. Tech (NIT Calicut)
PhD & PDF (USM, Malaysia)

Associate Professor
College of Architecture and Planning
Imam Abdulrahman Bin Faisal University
Kingdom of Saudi Arabia
Email: editor@ijatr.org; mmalmujeebu@iau.edu.sa

Scopus ID & Profile: 23988110300; http://www.scopus.com/authid/detail.url?authorId=23988110300# 
Researcher ID & Profile: O-5063-2014; http://www.researcherid.com/rid/O-5063-2014 
Orcid ID & Profile: 0000-0001-5057-5206; http://orcid.org/0000-0001-5057-5206
Research Gate Profile: https://www.researchgate.net/profile/M_Abdul_Mujeebu2
Google Scholar Profile: http://scholar.google.com.sg/citations?user=gaVNgqcAAAAJ&hl=en
LiveDNA Profile: http://livedna.org/91.11128
Elsevier Reviewer Profile: http://www.reviewerpage.com/Muhammad-Abdul-Mujeebu

Research Interests:

  • Combustion in porous media
  • Green buildings
  • Energy and thermal performance of buildings
  • Indoor air quality
  • Building sustainability
  • Industrial cogeneration (CHP) and trigeneration (CCHP)
  • Energy efficient refrigeration systems
  • Energy from waste
  • Absorption refrigeration system
  • Micro combustors & MEMS
  • Electronic cooling & packaging
  • CFD analysis of energy systems
  • IC engines and combustion
  • Heat pipes for CPU cooling
  • Composite materials
  • Nanotechnology
  • Reforms in Science and Technology Education
  • Higher education quality

Publications

International Journals

2008
  1. M. A. Ismail, M. Z. Abdullah and M. Abdul Mujeebu, CFD-Based Experimental Analysis on the Effect of Free Stream Cooling on the Performance of Micro Processor Heat Sinks, International Communications in Heat and Mass Transfer, Volume 35, Issue 6, July 2008, Pages 771-778.
  2. M.Khalil Abdullah, M. Z. Abdullah, M. Abdul Mujeebu, S. Kamaruddin and Z. M. Ariff. A Study on the Effect of Stack Thickness during Encapsulation of Stacked-Chip Scale Packages (S-CSP). Journal of Microelectronics & Electronic Packaging, Vol. 5, No. 2, Second Quarter 2008, Pages 62-67.
  3. Mazlan Mohamed, Rasdi Deraman, M.Z. Abdullah, M. Abdul Mujeebu, M. K. Abdullah, Three-Dimensional CFD Simulation for 8 PLCC Packages Mounted in Line on a Printed Circuit Board, ESTEEM, (Journal published by Universiti Teknologi Mara, Malaysia) Vol. 4(1), 79–99, 2008.
2009
  1. M. Abdul Mujeebu, S. Jayaraj, S. Ashok, M. Z. Abdullah and M. Khalil. Feasibility Study of Cogeneration in a Plywood Industry with Power Export to Grid, Applied Energy 86 (2009) 657–662.
  2. M. Abdul Mujeebu, M.Z Abdullah, M.Z Abu Bakar, A.A. Mohamad, R.M.N Muhad, M. Khalil, Combustion in Porous media and its applications- A comprehensive survey, Journal of Environmental Management 90 (2009) 2287–2312.
  3. M. Abdul Mujeebu, M.Z Abdullah, M.Z Abu Bakar, A.A. Mohamad, R.M.N Muhad, M. Khalil, Corrigendum to ‘‘Combustion in porous media and its applications – A comprehensive survey’’ [Journal of Environmental Management 90 (2009) 2287–2312]. Journal of Environmental Management 91 (2009) 550.
  4. M. Abdul Mujeebu, M.Z Abdullah, M.Z. Abu Bakar, A.A. Mohamad, M. K. Abdullah., A Review of Investigations on Liquid Fuel Combustion in Porous inert media, Progress in Energy and Combustion Science 35 (2009) 216–230.
  5. M. Abdul Mujeebu, M.Z Abdullah, M.Z. Abu Bakar, A.A. Mohamad, M. K. Abdullah. Applications of porous media combustion technology- A review, Applied Energy 2009; 86 (9) 1365–1375.
  6. M. Abdul Mujeebu, M. Z. Abdullah and S. Ashok, Viability of Biomass Fueled Steam Turbine Cogeneration with Power Export for an Asian Plywood Industry, Energy Exploration & Exploitation, Volume 27 • Number 3 • 2009 pp. 213-224.
  7. M.Khalil Abdullah, M. Z. Abdullah, M. Abdul Mujeebu, S. Kamaruddin and Z. M. Ariff. A Study on the Effect of Epoxy Moulding Compound (EMC) Rheology during Encapsulation of Stacked-Chip Scale Packages (S-CSP). Journal of Reinforced Plastics and Composites 2009; 28 (20): 2527-2538.
  8. C S Ramesh, R Noor Ahmed, M Abdul Mujeebu, M Z Abdullah, Fabrication and Study on Tribological Characteristics of Cast Copper-TiO2- Boric acid hybrid Composites, Materials & Design 30 (2009) 1632–1637.
  9. C S Ramesh, R Noor Ahmed, M Abdul Mujeebu, M Z Abdullah, Development and Performance Analysis of Novel Cast Copper-SiC- Gr hybrid Composites, Materials and Design 30 (2009) 1957–1965.
  10. M.K. Abdullah, M. Z. Abdullah, M. V. Ramana, C. Y. Khor, K. A. Ahmad, M. A. Mujeebu Y. Ooi, and Z. Mohd Ripin. Numerical and experimental investigations on effect of fan height on the performance of piezoelectric fan in microelectronic cooling, International Communications in Heat and Mass Transfer 36 (2009) 51–58.
  11. S. A. Ageel, A.M. Saleem, B. B. Farhad M. Abdul Mujeebu and, J. M. Alalkawi, Cold Extrusion of Carbon Electrodes Using Dies of CRHS Concept and Performance Analysis, Modern Applied Science (Journal of Canadian Center of Science and Education), 2009, Vol. 3, No. 3, pp. 44-54.
  12. A. Al-Mofleh, S. Taib, M. Abdul Mujeebu and W. Salah, Analysis of Sectoral Energy Conservation in Malaysia, Energy 34 (2009) 733–739.
  13. Mohamed Osman Saeed, Mohd Nasir Hassan, M Abdul Mujeebu. Assessment of Municipal Solid Waste Generation and Recyclable Materials Potential in Kuala Lumpur, Malaysia, Waste Management 29 (2009) 2209–2213.
  14. S. Yusoff, M. Mohamed, K. A. Ahmad, M. Z. Abdullah, M. Abdul Mujeebu, Z. Mohd Ali, F. Idrus, Y. Yaakob, 3-D Conjugate Heat Transfer Analysis of PLCC Packages Mounted In-line on a Printed Circuit Board, International Communications in Heat and Mass Transfer 36 (2009) 813–819.
  15. N.F.Zulkefli, E.N.Tai, M. Abdul Mujeebu, M.Z.Abdullah, K.A.Ahmad, Numerical and experimental investigations of passive flow control devices on a backward facing step, International Journal of Engineering and Technology, Vol. 6, No. 2, 2009, pp. 21-29.
2010
  1. M.Khalil Abdullah, M. Z. Abdullah, M. Abdul Mujeebu, S. Kamaruddin and Z. M. Ariff , Three-Dimensional Modelling on Effect of Multi Die-Stacking Shape in Mould Filling during Encapsulation of Microelectronic Chips, IEEE Transactions on Components Packaging and Manufacturing Technology 2010; 33 (2): 438 – 446.
  2. R.M.N. Muhad, M.Z. Abdullah, A. A. Mohamad, M. Abdul Mujeebu, M.Z. Abu Bakar, R. Zakaria,3-D numerical modeling and experimental investigation of partial-premix type porous medium burner using LPG fuel, Journal of Porous Media Volume 13, Issue 7, 2010, Pages 655-669.
  3. C.Y. Khor, M. Z. Abdullah, M. Abdul Mujeebu, M. K. Abdullah and Z. M. Ariff, Three dimensional numerical and experimental investigations on polymer rheology in meso-scale injection molding, International Communications in Heat and Mass Transfer, 37 (2010) 131–139.
  4. C.Y. Khor, M. Abdul Mujeebu, M. Z. Abdullah and F. Che Ani, Finite volume based CFD simulation of pressurized flip chip underfill encapsulation process, Microelectronics Reliability 50 (2010) 98–105.
  5. M. K. Abdullah, M. Z. Abdullah, M. Abdul Mujeebu, Horizon Gitano, Z. M. Ariff, R. Razali , K. A. Ahmad, Three-Dimensional Modelling of Mould Filling in Microchip Encapsulation Process with Matrix Array Arrangement, Journal of Electronic Packaging, Transactions of the ASME, 2010, Vol. 132, pp. 014502-1-6.
  6. C.Y. Khor, M. Z. Abdullah, M. Abdul Mujeebu, M. K. Abdullah and Z. M. Ariff. FV M based numerical study on the effect of solder bump arrangement on capillary driven flip chip underfill process, International Communications in Heat and Mass Transfer 37 (2010) 281–286.
  7. H. M.T. Khaleed, Z. Samad, A.R. Othman, M. Abdul Mujeebu, A. R. Arsyad, A. R. Ab-Kadir, A. Hussaini, A.B. Abdullah., Finite element analysis and experimental validation of flashless cold forging of propeller hubs and blade of autonomous underwater vehicle, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 224 (9):1455-1467, (2010)
  8. Mazlan Mohamed, M.Z. Abdullah, M. Abdul Mujeebu and M. K. Abdullah, Numerical Investigation of Heat Transfer in Plastic Leaded Chip Carrier (PLCC) Packages in In-line Arrangement, Journal of Modeling, Design & Management of Engineering Systems, 5(1):11 – 22 (2010).
  9. C.Y. Khor, M.K. Abdullah, M.Z. Abdullah, M. Abdul Mujeebu, D. Ramdan, M.F.M.A. Majid, and Z.M. Ariff. Effect of vertical stacking dies on flow behavior of epoxy molding compound during encapsulation of stacked-chip scale packages, Heat and Mass Transfer Volume 46, Issue 11-12 (2010):1315-1325.
  10. M. Abdul Mujeebu, M.Z Abdullah, M.Z. Abu Bakar, A.A. Mohamad, Trends in modeling of porous media combustion, Progress in Energy and Combustion Science 36 (2010) 627-650.
2011
  1. H.M.T. Khaleed, Z. Samad, A.R. Othman, A. R. Ab-Kadir, M. Abdul Mujeebu, A.B. Abdullah, Irfan Anjum Magami, N.J. Salman Ahmed. Computer-aided FE simulation for flash-less cold forging of connecting rod, Arabian Journal for Science and Engineering. August 2011, Volume 36, Issue 5, pp 855-865.
  2. M. Abdul Mujeebu, M. Z. Abdullah and S. Ashok, Husk-Fuelled Steam Turbine Cogeneration for a Rice Mill with Power Export- A Case Study, Energy Sources Part A- Recovery, Utilization, and Environmental Effects. Volume 33 Issue 8, 724 (2011).
  3. R.M.N. Muhad, M.Z. Abdullah, M. Abdul Mujeebu, M.Z. Abu Bakar, R. Zakaria, A.A. Mohamad. Development and performance analysis of partially premixed LPG porous medium combustor, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 2011; 33(13) 1260-1270.
  4. M. Z. Abdullah, M. Abdul Mujeebu, H. Gitano, Y. Yaakob and M. K. Abdullah, Transient Natural Convection in a Rectangular Cavity Filled with Porous Medium Heated Discretely at Vertical Wall, J. of Engineering Science, Vol. 7, 2011, pp. 1-13.
  5. Padmayya Naik, Mohamad Ibrahim, A.O. Surendranathan, M. Abdul Mujeebu. Development and characterization of carbon-carbon composite for aircraft brake pad using Preformed Yarn method. World Journal of Engineering 8(3) (2011) 251-258.
  6. M. Abdul Mujeebu, M. Z. Abdullah, A. A. Mohamad. Development of energy efficient porous medium burners on surface and submerged combustion modes, Energy 36 (2011) 5132-5139.
  7. M. Sri Raj Rajeswari, K.A.M. Azizli, S.F.S. Hashim, M.K. Abdullah, M. Abdul Mujeebu, M.Z. Abdullah. CFD Simulation and Experimental Analysis of Flow Dynamics and Grinding Performance of Opposed Fluidized Bed Air Jet Mill, International Journal of Mineral Processing 98 (2011) 94–105.
  8. C.Y. Khor, M.K. Abdullah, M.Z. Abdullah, M. Abdul Mujeebu, D. Ramdan, M.F.M.A. Majid, Z.M. Ariff and M.R Abdul Rahman. Numerical analysis on the effects of different inlet gates and gap heights in TQFP encapsulation process, International Journal of Heat and Mass Transfer 54(9–10), (2011): 1861–1870.
  9. H.M.T. Khaleed, Z. Samad, A.R. Othman, M. Abdul Mujeebu, A.B. Abdullah, M.M.Zihad. Work-piece optimization and thermal analysis for flash-less cold forging of AUV propeller hubs - FEM simulation and experiment. Journal of Manufacturing Processes, 13(1), 2011, Pages 41-49.
  10. Mohamed H A Elnaggar, M. Z. Abdullah and M. Abdul Mujeebu. Experimental Analysis and FEM Simulation of Finned U-shape Multi Heat Pipe for Desktop PC Cooling. Energy Conversion and Management 52 (2011) 2937–2944.
  11. M. Abdul Mujeebu, M.Z Abdullah, M.Z. Abu Bakar, A.A. Mohamad. Mesoscale premixed LPG burner with surface combustion in porous ceramic foam, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects (2011) 34:1, 9-18.
  12. M. Abdul Mujeebu, M.Z Abdullah, M.Z. Abu Bakar, A.A. Mohamad. Development of premixed burner based on stabilized combustion within discrete porous medium, Journal of Porous Media. 14 (10) (2011) 909-917.
2012
  1. Mahfoozur Rehman, M. Abdul Mujeebu, Tan Boon Kheng and Basem A. J. A. Abu Izneid, A microprocessor based novel instrument for temperature and thermal conductivity measurements, Experimental Techniques. Volume 36, Issue 5, pages 62–70, September/October 2012.
  2. Mahfoozur Rehman, M. Abdul Mujeebu, Y.S. Cheng and Amir Abu Al Aish, Design and Development of a microcontroller based human response measurement system, Experimental Techniques. Volume 36, Issue 5, pages 62–70, September/October 2012
  3. W.C. Leong M.Z. Abdullah, M. Abdul Mujeebu. Flow induced deflection and stress on flexible printed circuit board (FPCB) in fan-cooled electronic systems: FSI approach. IEEE Transactions on Components Packaging and Manufacturing Technology 2(4): 617 – 624 (2012).
  4. C.Y. Khor, M.Z. Abdullah and M. Abdul Mujeebu. Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates. Journal of Electronic Packaging, Transactions of the ASME 134 (01) 10031-6 (2012).
  5. M. H. A. Elnaggar, M. Z. Abdullah and M. Abdul Mujeebu. Characterization of working fluid in vertically mounted Finned U-Shape Twin Heat Pipe for Electronic Cooling. Energy Conversion and Management Volume 62 (2012), Pages 31–39.C.Y. Khor, M.Z. Abdullah and M. Abdul Mujeebu. Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates. Journal of Electronic Packaging, Transactions of the ASME 134 (01) 10031-6 (2012).
  6. D. Ramdan, M. Z. Abdullah, and M. Abdul Mujeebu, W. K. Loh, C. K. Ooi, R. C. Ooi, FSI simulation of wire sweep PBGA encapsulation process considering rheology effect, IEEE Transactions on Components Packaging and Manufacturing Technology, Vol. 2 (4), April 2012.M. H. A. Elnaggar, M. Z. Abdullah and M. Abdul Mujeebu. Characterization of working fluid in vertically mounted Finned U-Shape Twin Heat Pipe for Electronic Cooling. Energy Conversion and Management Volume 62 (2012), Pages 31–39.C.Y. Khor, M.Z. Abdullah and M. Abdul Mujeebu. Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates. Journal of Electronic Packaging, Transactions of the ASME 134 (01) 10031-6 (2012).
  7. Abdullah MK, Ismail NC, Abdullah MZ, Abdul Mujeebu M, Ahmad KA, Ripin Z. Mohd (2011) Effects of Tip Gap and Amplitude of Piezoelectric Fans on the Performance of Heat Sinks in Microelectronic Cooling. Heat and Mass Transfer. June 2012, Volume 48, Issue 6, pp 893-901.D. Ramdan, M. Z. Abdullah, and M. Abdul Mujeebu, W. K. Loh, C. K. Ooi, R. C. Ooi, FSI simulation of wire sweep PBGA encapsulation process considering rheology effect, IEEE Transactions on Components Packaging and Manufacturing Technology, Vol. 2 (4), April 2012.M. H. A. Elnaggar, M. Z. Abdullah and M. Abdul Mujeebu. Characterization of working fluid in vertically mounted Finned U-Shape Twin Heat Pipe for Electronic Cooling. Energy Conversion and Management Volume 62 (2012), Pages 31–39.C.Y. Khor, M.Z. Abdullah and M. Abdul Mujeebu. Influence of gap height in flip chip underfill process with non-Newtonian flow between two parallel plates. Journal of Electronic Packaging, Transactions of the ASME 134 (01) 10031-6 (2012).
  8. M. K. Abdullah, B. H. Murni, M. Z. Abdullah, M. Abdul Mujeebu, F. Hussin, H. Yusoff, N.C. Ismail, K. A. Ahmad, and Z. Mohd Ripin. Heat transfer enhancement using piezoelectric fan in electronic cooling - experimental and numerical observations. ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology (2012) 32 (1): 41-49.
  9. M. C. Ting, M. Abdul Mujeebu, M. Z. Abdullah, M. R. Arshad, Numerical study on hydrodynamic performance of shallow underwater glider platform, Indian J. of Marine Sciences, Vol. 41(2), April 2012, pp. 124-133.
  10. M. K Abdullah, N. C Ismail, M. Abdul Mujeebu, M. Z Abdullah, K. A Ahmad, Muhamad Husaini, M. N. A. Hamid. Optimum Tip Gap and Orientation of Multi-Piezofan for Heat Transfer Enhancement of Finned Heat Sink in Microelectronic Cooling. International Journal of Heat and Mass Transfer Volume 55, Issues 21–22 (2012), Pages 5514–5525.
  11. S. F. Shaker, M.Z. Abdullah, M. Abdul Mujeebu, K.A. Ahmad and M.K. Abdullah. Study on the Effect of Number of Film Cooling Rows on the Thermal Performance of Gas Turbine Blade. ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology. 32 (2): 89-98, 2012.
2013
  1. Mohamed H A Elnaggar, M. Z. Abdullah and M. Abdul Mujeebu. Experimental investigation and optimization of heat input and coolant velocity of finned twin U-shaped heat pipe for CPU cooling. Experimental Techniques. Volume 37, Issue 6, November/December 2013.
  2. D. Ramdan, C.Y. Khor , M. Abdul Mujeebu, M. Z. Abdullah, W. K. Loh and C. K. Ooi, FSI Analysis of Wire Sweep in Encapsulation Process of Plastic Ball Grid Array Packaging, ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology. 33(1):101-109, 2013.
  3. H. J. Tony Tan, M.Z. Abdullah, M. Abdul Mujeebu. Effects of Geometry and number of Hollow on the Performance of Rectangular Fins in Microchannel Heat Sinks. ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology. 33(1):01-09, 2013.
  4. M. Abdul Mujeebu, M. Z. Abdullah, Mohammed Zuber. Experiment and simulation to develop clean porous medium surface combustor using LPG. ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology. 33 (1): 55-61, 2013.
  5. H.M.T. Khaleed, Z. Samad, M. Abdul Mujeebu, A.B. Abdullah. Flash-less Cold Forging of AUV Propeller Blade: Work-piece Optimization and Thermal Analysis. Arabian Journal for Science and Engineering. September 2013, Volume 38, Issue 9, pp 2509-2519.
  6. H. Yusoff, M. Z. Abdullah, M. Abdul Mujeebu and K. A. Ahmad. Development of Flexible Wings and Flapping Mechanism with Integrated Electronic Control System, for Micro Air Vehicle research. Experimental Techniques 37(4), 2013, pp. 25-37.
2014
  1. Lau, C., Abdullah, M. Z., Abdul Mujeebu, M., & Yusop, N. (2014). Finite element analysis on the effect of solder joint geometry for the reliability of ball grid array assembly with flexible and rigid PCBs, Journal of Engineering Science and Technology, School of Engineering Taylor’s University. 9(1), 47–63.
  2. H.M.T. Khaleed, M.F. Addas, M Abdul Mujeebu, Abdullah A. Al-Rashed, Irfan Anjum Badruddin, G.A. Quadir, Salman Ahmed N.J, T.M. Yunus khan, Sarfaraz Kamangar. Flash-less Cold Forging of Cup-shaped Object and Stress Analysis of Forging Die using FEM Simulation and Experiment. Australian Journal of Basic and Applied Sciences, 8 (24): 401-410, 2014.
2015
  1. H. Yusoff, M. Z. Abdullah, K. A. Ahmad, M. Abdul Mujeebu. Effect of Skin Flexibility on Aerodynamic Performance of Flexible Skin Flapping Wings for Micro Air Vehicles. Experimental Techniques. 39 (2015) 11–20.
  2. Othman Alshamrani and M Abdul Mujeebu. Effects of Shading Strategy and Orientation on Energy Performance of School Building. Journal of Architecture and Planning 2015; 28 (1): 129-141.
  3. M Abdul Mujeebu and Othman Subhi Alshamrani. A Review of Solar Energy Exploration and Utilization in Saudi Buildings. International Journal of Advanced Thermofluid Research 2015; 1(1): 70-85
  4. Isabel Malico and M Abdul Mujeebu. Potential of Porous Media Combustion Technology for Household Applications. International Journal of Advanced Thermofluid Research 2015; 1(1): 50-69.

Invited Book Chapters

  1. Combustion in porous inert media, Chapter 15, pp.195-205 in: Combustion Synthesis - Novel Routes to Novel Materials, Edited by Maxmilian Lackner, Bentham Science Publishers Ltd. 2010, (eISBN: 978-1-60805-155-7).
  2. Applications of Porous Media Combustion Technology, Chapter 24, pp.615-633 in: “Role of Colloidal Systems in the Environmental Protection”, Elsevier B.V. 2014, Edited by Monzer Fanun, ISBN: 978-0-444-63283-8.
    URL: http://www.sciencedirect.com.ezp.uod.edu.sa/science/book/9780444632838
  3. Porous Media Combustion Technology, Vol.12. Chapter 21 in: “Compendium of Energy Science and Technology” Edited by J.N.Govil, Studium Press LLC. USA (Book under printing).

Conference Proceedings

  1. S.F. Shaker, M.Z. Abdullah, M.A. Ismail, M. K. Abdullah, M.A. Mujeebu, Modeling of Gas Turbine Blades for Different Cooling Arrangement, Proc. Mechanical Engineering research Colloquium(MERC’08), Universiti Sains Malaysia 27-28 Aug. 2008, Pages 07-13.
  2. H. Yusoff, M. Z. Abdullah, Z. M. Kassim, M. A. Mujeebu, and M. Khalil, Study of Vortex Shedding between Two Cylinders in Tandem Arrangement using Flexible PIV Technique, Proc. International Conference on Micro electro mechanical Systems (MEMS 08), Anjuman Engineering College, Bhatkal, S.India, 22-23 Oct. 2008.
  3. M. O. Saeed, M.N. Hassan, M Abdul Mujeebu, Development of Municipal Solid Waste Generation and Recyclable Materials Component Rate for Kuala Lumpur: Perspective Study , Proc. International Conference on Environment (ICENV 2008), G Hotel, Penang, Malaysia, December 15-17, 2008, School of Chemical Engineering, Universiti Sains Malaysia, page-113.
  4. M.O. Saeed, M.S. Ahamad, H.A. Aziza, M Abdul Mujeebu, Geographic information system (GIS) components for deriving sanitary landfill site weighting criteria, Proc. International Conference on Environment (ICENV 2008), G Hotel, Penang, Malaysia, December 15-17, 2008, School of Chemical Engineering, Universiti Sains Malaysia, page-83.
  5. M.Abdul Mujeebu, M.Z Abdullah, M.Z. Abu Bakar, A.A. Mohamad, Development of mesoscale premixed porous medium burners for household applications, Proc. Mechanical Engineering research Colloquium(MERC’09), Universiti Sains Malaysia 30 Sep – 02 Oct. 2009, Pages 01- 06.
  6. C.Y. Khor, M. Z. Abdullah, M. Abdul Mujeebu, F. Che Ani, Numerical simulation of solder ball effect on capillary flow under-fill process in flip chip packaging, Proc. Mechanical Engineering research Colloquium(MERC’09), Universiti Sains Malaysia 30 Sep – 02 Oct. 2009, Pages 25- 31.
  7. Sri Raj Rajeswari Munusamy, Khairun Azizi Mohd Azizli, Mohd Zulkifly Abdullah, Syed Fuad Saiyid Hashim, M. Abdul Mujeebu, Muhammad Khalil Abdullah 3D modeling and simulation of air jet mill for ultrafine grinding process using CAD and CFD techniques, Proc. of 4th colloquium on post graduate research: National post graduate colloquium on materials, minerals and polymers (MAMIP 2010), Vistana Hotel, Penang, Malaysia, 27-28- Jan. 2010.
  8. M.K. Abdullah, M.B. Hashim, M.Z. Abdullah, M.A. Mujeebu, K.A. Ahmad, F. Ismail, M. R. Abdul Rahman, N. M. Yusop, Z. Mohd Ripin. Study on piezoelectric fan height on the cooling performance of PLCC electronic package. Proceedings of the 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference, January 4-6, 2010, Mumbai, India.
  9. Khaleed, M.T.H., Mujeebu, M.A., Abdullah, A.B., Irfan Anjum, Magami, Ahmed, N.J. Salman. Flash-less cold forging of connecting rod using computer-aided FE simulation. Proceedings of International Conference on Applications and Design in Mechanical Engineering 2009 (iCADME 2009), 11th - 13th October 2009 at Batu Feringhi, Penang, Malaysia. ISBN: 978-967-5415-07-4. p.10A 1 - 10A 7.
  10. Khaleed, H. M.T., Samad, Z., Othman, A.R., Abdul Mujeebu, M., Hussaini A. Abdullah, A.B., Magami I.B., Ahmed, N.J. Salman. Qadir, G.A., Jeevan, K. FEM analysis and experimental validation of flashless cold forging of autonomous underwater vehicle hubs. Proceedings of International Conference on Applications and Design in Mechanical Engineering 2009 (ICADME 2009), 11th - 13th October 2009 at Batu Feringhi, Penang, Malaysia. ISBN: 978-967-5415-07-4. p.10B 1 - 10B 7.
  11. C.Y. Khor, M. Abdul Mujeebu, A. Jappar, M.S. Aris, M.Z. Abdullah. Three dimensional CFD simulation of non-Newtonian flow for the underfill flow in flip chip packaging. Proceedings of ICFD 10: Tenth International Congress of Fluid Dynamics. December 16-19, 2010, Stella Di Mare Sea Club Hotel, Ain Soukhna, Red Sea, Egypt (ICFD10-EG-3097).
  12. C.Y. Khor, M.Z. Abdullah, M. Abdul Mujeebu, F. Che Ani. FVM Based Simulations Study of Different Injection Types on Flip Chip Pressurized Underfill Encapsulation Process. Proceedings of 11th International Conference on Electronics Materials and Packaging (EMAP 2009), Penang, Malaysia, 1 – 3 December 2009. Page 67-70.
  13. Anwar Al-Mofleh, Soib Taib, M. Abdul Mujeebu, Al-Gulman Hamza, W Salah. Approach to Energy Management: USM Practices. Proceedings: GCREEDER 2009, Amman-Jordan, March 31st – April 2nd 2009. Paper No.:- 401-d.
  14. C.Y. Khor, M. Abdul Mujeebu, A. Jappar, M.S. Aris, M.Z. Abdullah. Numerical simulation of non-Newtonian flow for the underfill process in flip chip packaging. Proceedings of 12th International Conference on Electronics Materials and Packaging (EMAP 2010), October 25-27, 2010, Orchard Hotel, Singapore. Paper No. 67.